100GBASE-SR10 interwork with 10GBASE-SR
Hi all, is there anyone who has experience the interworking 100GBASE-SR10 with 10GBASE-SR over 24-fiber ribbon cables terminated with MPO/MTP-24 connectors? If yes, any implementation consideration I should be aware? Regards, Steven Lee
Steven, In general, there isn't much to worry about optically when interfacing 100GBASE-SR10 and 10GBASE-SR. If you are using CFP transceivers or CXP transceivers for the 100GBASE-SR10, your mileage may vary. For example, the Avago CXP AFBR-83PDZ has a transmit power range of -7.6dBm to 2.4dBm per lane. The Avago XFP AFBR-720XPDZ has an overload value of 1dBm on the receiver. We've observed errors when operating a device above the overload value. So attenuation is needed. There are "interoperable" devices from various vendors, making sure the optical interfaces do not need attenuation. I can provide more details offline, let me know what you are thinking about using. chad On 3/21/14, 7:54 AM, Lee, Steven (Network Consulting Malaysia) wrote:
Hi all, is there anyone who has experience the interworking 100GBASE-SR10 with 10GBASE-SR over 24-fiber ribbon cables terminated with MPO/MTP-24 connectors?
If yes, any implementation consideration I should be aware?
Regards, Steven Lee
The information contained in this e-mail message may be privileged, confidential and protected from disclosure. If you are not the intended recipient, any dissemination, distribution or copying is strictly prohibited. If you think that you have received this e-mail message in error, please e-mail the sender at the above e-mail address.
participants (2)
-
Chad Lamb
-
Lee, Steven (Network Consulting Malaysia)