How many people are using Juniper routers on their networks and what is your experiences with them? Also, what equipment do you use for switching?
"Todd Reed" <treed@astate.edu> writes:
How many people are using Juniper routers on their networks
Lots.
and what is your experiences with them?
Usually good.
Also, what equipment do you use for switching?
Schneider. http://www.squared.com/ ---Rob
Todd,
How many people are using Juniper routers on their networks and what is your experiences with them?
Lots of companies here in Brazil are using Juniper Routers. Think that BT and Internet2, besides Global Crossing could be good references too. Also, what equipment do you use for switching? You can use Force Ten, Foundry or Extreme. Att, Giuliano
I have used 3com, cisco, allied telesyn switches successful with vlans.. with a m40 with no problem. -erik
-----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu]On Behalf Of Giuliano Cardozo Medalha Sent: Monday, June 06, 2005 7:31 AM To: Todd Reed Cc: nanog@merit.edu Subject: Re: Juniper Routers with X switches
Todd,
How many people are using Juniper routers on their networks and what is your experiences with them?
Lots of companies here in Brazil are using Juniper Routers. Think that BT and Internet2, besides Global Crossing could be good references too.
Also, what equipment do you use for switching?
You can use Force Ten, Foundry or Extreme.
Att,
Giuliano
participants (4)
-
Erik Sundberg -
Giuliano Cardozo Medalha -
Robert E.Seastrom -
Todd Reed