I will sugest to test the throughput when a BGP peer is flapping. -----Original Message----- From: Michael J McCafferty <mike@m5computersecurity.com> Sent: 23 iulie 2009 03:05 To: nanog <nanog@nanog.org> Subject: What else shall we test? All, We are putting together a test plan to test a pair of Cisco 7206 VXR's, each with with NPE-G2. The purpose of the test is just to make sure we know where their realistic limits are with a real configuration, full route tables from two providers, etc. We have one JDSU T-Berd 8000 test system with interfaces and software to test a single stream through multi-mode fiber interfaces. We plan to test through the interfaces on the NPE and through PA-GE cards with a variety of packet sizes (especially 64 Byte). I'd be interested in any thoughts on additional testing or testing methodologies we might want to do, to help us set our expectations for this setup and to plan when we need to go bigger as we grow traffic, hosts, etc. We plan to get 1 to 3 additional full tables and peer with Any2 Easy on this network within the next year. We want to determine how this platform will behave under moderate DoS attacks, BGP updates, etc. Is there anything else we need to be mindful of? Can we get a realistic test of the routers with the T-Berd? What else should we test while we have the maintenance window and the test system on hand? Your thoughts and experience are appreciated! Thanks ! Mike -- ************************************************************ Michael J. McCafferty Principal, Security Engineer M5 Hosting http://www.m5hosting.com You can have your own custom Dedicated Server up and running today ! RedHat Enterprise, CentOS, Ubuntu, Debian, OpenBSD, FreeBSD, and more ************************************************************