Good Morning Everyone! I will be asking this on other lists, but I hope to hear from you guys as you're most likely going to have more experience, collectively, than the other lists. I'm trying to do policy routing on a couple of Foundry BigIron 4000 routers. I've put sho ver info below. I am seeing really strange failure modes when doing this. The main one is a random subnet or two will be slowed down to a crawl and then finally not communicate at all. There is seemingly no commonality in the failures as different subnets fail and other subnets on the same router are not affected. There is nothing in the logs. There are some other less obvious failures as well. Anyone out there in NOG-land seeing similarly strange issues on your policy routing Foundry routers? Thanks, scott SW: Version 07.6.04mT53 Copyright (c) 1996-2003 Foundry Networks, Inc. Compiled on Mar 02 2004 at 16:00:56 labeled as B2R07604m (2882638 bytes) from Primary b2r07604m.bin HW: BigIron 4000 Router, SYSIF version 21, Serial #: Non-exist ========================================================================== SL 1: B8GMR Fiber Management Module, SYSIF 2, M3, ACTIVE Serial #: CH20006393 4096 KB BRAM, SMC version 1, BM version 21 512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA 0, version 0209 512 KB PRAM(512K+0K) and shared CAM entries for DMA 1, version 0209 512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA 2, version 0209 512 KB PRAM(512K+0K) and shared CAM entries for DMA 3, version 0209 ========================================================================== SL 2: B8G Fiber Switch Module, SYSIF 2 (Mini GBIC) Serial #: ? 2048 KB BRAM, SMC version 1, BM version 21 512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA 4, version 0209 512 KB PRAM(512K+0K) and shared CAM entries for DMA 5, version 0209 512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA 6, version 0209 512 KB PRAM(512K+0K) and shared CAM entries for DMA 7, version 0209 ========================================================================== SL 3: B8G Fiber Switch Module Serial #: Non-exist 2048 KB BRAM, SMC version 1, BM version 21 256 KB PRAM(256K+0K) and 2048*8 CAM entries for DMA 8, version 0209 256 KB PRAM(256K+0K) and shared CAM entries for DMA 9, version 0209 256 KB PRAM(256K+0K) and 2048*8 CAM entries for DMA 10, version 0209 256 KB PRAM(256K+0K) and shared CAM entries for DMA 11, version 0209 ========================================================================== Active management module: 400 MHz Power PC processor 740 (version 8/8202) 66 MHz bus 512 KB boot flash memory 8192 KB code flash memory 256 KB SRAM 128 MB DRAM
participants (1)
-
Scott Weeks