If you have a router, you can turn on shaping to the bandwidth the link will support. -Blake On Tue, Aug 27, 2013 at 12:11 PM, Nick Olsen <nick@flhsi.com> wrote:
I do indeed have stats for "TX Pause Frames" And they do increment. However, Our router is ignoring them since it doesn't support flow control.
I guess my next question would be. In the scenario where we insert a switch between the radio and the router that does support flow control. Are we not only moving where the overflow is going to occur? Will we not see the router still burst traffic at line rate toward the switch, Which then buffer overflows sending to the radio on account of it receiving pause frames?
Nick Olsen Network Operations (855) FLSPEED x106
------------------------------ *From*: "Tim Warnock" <timoid@timoid.org> *Sent*: Tuesday, August 27, 2013 1:08 PM *To*: "Blake Dunlap" <ikiris@gmail.com>, "nick@flhsi.com" <nick@flhsi.com> *Cc*: "nanog@nanog.org" <nanog@nanog.org> *Subject*: RE: TCP Performance
Regardless, your problem looks like either tail drops or packet loss, which you showed originally. The task is to find out where this is occurring, and which of the two it is. If you want to confirm what is going on, there are some great bandwidth calculators on the internet which will show you what bandwidth you can get with a given ms delay and % packet loss.
As far as flow control, its really outside the scope. If you ever need flow control, there is usually a specific reason like FCoE, and if not, it's generally better to just fix the backplane congestion issue if you can, than ever worry about using FC. The problem with FC isn't node to node, its when you have node to node to node with additional devices, it isn't smart enough to discriminate, and can crater your network 3 devices over when it would be much better to just lose a few packets.
-Blake
In my experience - if you're traversing licenced microwave links as indicated flow control will definitely need to be ON.
Check the radio modem stats to confirm but - if you're seeing lots of drops there you're overflowing the buffers on the radio modem.