Hi all, do you know if I will be able to use two different vendors to execute these tests ? For example, let's say that I have one JDSU unit in the side A and a EXFO unit in the side B. Will these tests work ? If not, is there a way to execute these tests having two different vendors ? Thanks ./diogo -montagner On Tue, Nov 2, 2010 at 2:13 AM, Holmes,David A <dholmes@mwdh2o.com> wrote:
EXFO also sells the BRIX SLA verifier, which calculates RTT, packet loss, and jitter for various applications running on top of the link layer.
-----Original Message----- From: Tim Jackson [mailto:jackson.tim@gmail.com] Sent: Wednesday, October 27, 2010 6:54 PM To: Diogo Montagner Cc: nanog@nanog.org Subject: Re: Ethernet performance tests
We dispatch a technician to an end-site and perform tests either head->head with another test set, or to a loop at a far-end..
We do ITU-T Y.156sam/EtherSAM and/or RFC2544 tests depending on the customer requirements. (some customers require certain tests for x minutes)
http://www.exfo.com/en/Products/Products.aspx?Id=370 ^--All of our technicians are equipped with those EXFO sets and that module. Also covers SONET/DS1/DS3 testing as well in a single easy(er) to carry set..
-- Tim
Hello everyone,
I am looking for performance test methodology for ethernet-based circuits. These ethernet circuits can be: dark-fiber, l2circuit (martini), l2vpn (kompella), vpls or ng-vpls. Sometimes, the ethernet circuit can be a mix of these technologies, like below:
CPE <-> metro-e <-> l2circuit <-> l2vpn <-> l2circuit <-> metro-e <-> CPE
The goal is verify the performance end-to-end.
I am looking for tools that can check at least the following
On Wed, Oct 27, 2010 at 6:32 PM, Diogo Montagner <diogo.montagner@gmail.com> wrote: parameters:
- loss - latency - jitter - bandwidth - out-of-order delivery
At this moment I have been used IPerf to achieve these results. But I would like to check if there is some test devices that can be used in situations like that to verify the ethernet-based circuit performance.
The objective of these tests is to verify the signed SLAs of each circuit before the customer start to use it.
I checked all MEF specifications and I only find something related to performance for Circuit Emulation over Metro-E (which is not my case).
Appreciate your comments.
Thanks! ./diogo -montagner