ASR1k doesn't have fixed TCAM like the 6500 and has a little more wiggle room, but it depends on the ESP you have installed. For example ESP 20 supports around 1,000,000 routes. http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-agg... -Pete On Wed, May 7, 2014 at 6:45 PM, Shawn L <shawnl@up.net> wrote:
Do the ASR1k routers have this issue as well? I searched around but couldn't find any information.
---------- Forwarded message ---------- From: Irwin, Kevin <Kevin.Irwin@cinbell.com> Date: Wed, May 7, 2014 at 10:39 AM Subject: Re: Getting pretty close to default IPv4 route maximum for 6500/7600 routers. To: "nanog@nanog.org" <nanog@nanog.org>
I¹m really surprised that most people have not hit this limit already, especially on the 9K¹s, as it seems Cisco has some fuzzy math when it comes to the 512K limit.
Also make sure you have spare cards when you reload after changing the scaling, those old cards don¹t always like to come back.
On 5/6/14, 7:01 PM, "Larry Sheldon" <LarrySheldon@cox.net> wrote:
On 5/6/2014 10:39 AM, Drew Weaver wrote:
Just something to think about before it becomes a story the community talks about for the next decade.
Like we have for the last two?
-- Requiescas in pace o email Two identifying characteristics of System Administrators: Ex turpi causa non oritur actio Infallibility, and the ability to learn from their mistakes. (Adapted from Stephen Pinker)
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you receive this in error, please contact the sender and destroy any copies of this document.