Unfortunately not yet, as far as I know. Long time ago I gave this to my account team Title: Direct routes must support tag and or community Platform: Trio, priority MX80, MPC2 JunOS: 12.4Rx Command: 'set interfaxe ge-4/2.0 family inet address 10.42.42.1/24 tag|community X' JTAC: n/a ER: - Router must be able to add tags communities to direct routes directly, like it does for static routes Usage Case: Trivial way to signal route information to BGP. Often tag/community is used by service providers to singal 'this is PI/PA prefix, leak it to internet' or 'this is backup route, reduce its MED'. However for some reason it is only supported for static routes, while usage scenario and benefits are exactly the same for direct routes. On Sun, 15 Oct 2023 at 15:27, Stanislav Datskevych via NANOG <nanog@nanog.org> wrote:
Dear all,
Is there a way to add BGP communities on direct (interface) routes in Junipers? The task looks to be simple but the solution eludes me. In Cisco/Arista, for example, I could use "network 192.0.2.0/24 route-map <SOME_MAP_THAT_ADDS_COMMUNITIES>".
In Juniper it seems to be impossible. I even tried putting interface-routes into rib-group with an import policy. But it seems the import policy only works on importing routes into Secondary routing tables (e.g. inet.50), and not into the Primary one (inet.0).
I know it's possible to add communities on later stage while announcing networks to peers, in [protocols bgp group <name> export]. But I'd better slap the community on the routes right when they're imported into RIB, not when they announced to peers.
Thanks in advance.
-- ++ytti