Whether a 40G port can be broken into 4x10G is dependent on the router/switch hardware and the optic you use. Good news is that most 40G ports are capable of being broken out into 4x10G, since a 40G port is usually operating as 4x10G internally anyway to the ASIC. The QSFP you'll need would be a 40G-SR4 for MTP/Multimode or 40G-LR4 for MTP/Singlemode (or a lower power, less expensive equivalent). This is a pretty common use of 40G ports. All 4 10G ports would then be at 850nm or 1310nm, which you can then plug into any 10G SR or LR ports. What router or switch platform is driving the 40G? Paul Z On Mon, Feb 5, 2018 at 7:57 AM, Baldur Norddahl <baldur.norddahl@gmail.com> wrote:
Hello
Is it possible to reform a 40G signal as individual 10G links?
The idea is to use a 40G QSFP multimode MTP module such as https://www.fs.com/products/44058.html. Then connect it using a MTP breakout cable such as https://www.fs.com/products/68049.html to get four dual fiber connectors. These are then connected to four 10G SFP+ multimode modules such as https://www.fs.com/products/11589.html. The reformer could be https://www.fs.com/products/43721.html. And finally the reformed signal can be transported using anything including DWDM modules such as https://www.fs.com/products/44058.html.
Just using fs.com as a reference to the kind of equipment I am talking about. Many other vendors offer simelar products.
The motivation for doing this is to get access to the many options that are available for 10G optics but not possible with 40G.
Regards,
Baldur