4 Apr
2014
4 Apr
'14
9:24 a.m.
So what, that sends IP packets, are you using to *measure* it. I can
Agilent if we need unidir. Normal run-of-the-mill 10GE SP router will give you low single digit microsecond jitter when not congested. (You can run 99.99% no problem, as long as you don't try >100% (i.e. >1 interface sending)). We only do bidir for constant measurements of network, unidir is unfortunately only for troubleshooting case-by-case. It would be very nice to always have unidir view to the network, but cost/benefit is not there if you have lot of pops. -- ++ytti