My equipment that can't do 5.4 with the latest stable or beta firmware says you can't. Hopefully we get 5.1 "soon". :) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 19, 2015 11:36 PM, "Faisal Imtiaz" <faisal@snappytelecom.net> wrote:
FCC Cert claims different.
:)
Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: Support@Snappytelecom.net
------------------------------
*From: *"Josh Luthman" <josh@imaginenetworksllc.com> *To: *"Faisal Imtiaz" <faisal@snappytelecom.net> *Cc: *"NANOG list" <nanog@nanog.org>, "Ray Soucy" <rps@maine.edu> *Sent: *Friday, June 19, 2015 9:16:37 PM *Subject: *Re: Whats' a good product for a high-density Wireless network setup?
Uhm he's not wrong...
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 19, 2015 9:13 PM, "Faisal Imtiaz" <faisal@snappytelecom.net> wrote:
The thing you need to watch out for with Ubiquiti is that they don't support DFS, so the entire U-NII-2 channel space is off limits for 5 GHz.
Huh ????
Please verify your facts before making blanket statements which are not accurate ...
Faisal Imtiaz Snappy Internet & Telecom
----- Original Message -----
From: "Ray Soucy" <rps@maine.edu> To: "Sina Owolabi" <notify.sina@gmail.com> Cc: "nanog@nanog.org list" <nanog@nanog.org> Sent: Friday, June 19, 2015 7:07:01 PM Subject: Re: Whats' a good product for a high-density Wireless network setup?
I know you don't want to hear this answer because of cost but I've had good luck with Cisco for very high density (about 1,000 clients in a packed auditorium actively using the network as they follow along with the presenter).
The thing you need to watch out for with Ubiquiti is that they don't support DFS, so the entire U-NII-2 channel space is off limits for 5 GHz. That's pretty significant because you're limited to 9 x 20 MHz channels or 4 x 40 MHz channels. Keeping the power level down and creating small cells is essential for high density, so with less channels your hands are really tied in that case. Also, avoid the Zero Handoff marketing nonsense they advertise; I'm sure it can work great for a low client residential area but it requires all APs to share a single channel and depends upon coordinating only one active transmitter at a time, so it simply won't scale.
I don't have experience with other vendors at large scale or high density.
I don't think what you're talking about is really high density anymore though. That's just normal coverage. Wireless is a lot more complicated than selecting a vendor, though. If you know what you're doing even Ubiquiti could work decently, but if you don't even a Cisco solution won't save you. You really need to be on top of surveying correctly and having appropriate AP placement and channel distribution.
On Fri, Jun 19, 2015 at 1:57 AM, Sina Owolabi <notify.sina@gmail.com> wrote:
Hi
We are profiling equipment and design for an expected high user density network of multiple, close nit, residential/hostel units. Its going to be 8-10 buildings with possibly a over 1000 users at any given time. We are looking at Ruckus and Ubiquiti as options to get over the high number of devices we are definitely going to encounter.
How did you do it, and what would you advise for product and layout?
Thanks in advance!
-- Ray Patrick Soucy Network Engineer University of Maine System
T: 207-561-3526 F: 207-561-3531
MaineREN, Maine's Research and Education Network www.maineren.net