11 Nov
2010
11 Nov
'10
1:50 p.m.
On Wed, 10 Nov 2010, Dave Temkin wrote:
From a VZ IP circuit that I have:
interface Loopback0 ip address x.x.x.x 255.255.255.255 (actual assigned mask is 255.255.255.252)
interface Serial0/0/0 bandwidth 1536 ip unnumbered Loopback0
ip route 0.0.0.0 0.0.0.0 Serial0/0/0
Works great for me across ~50 sites.
Apparently, cisco will not allow this to be done on an Ethernet interface, even if it is acting as a WAN interface. You get this: Point-to-point (non-multi-access) interfaces only James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am =========================================================================