Thanks, Jason. While I might have idle curiosity of how well my link performs when I first get it, beyond that the only time I care is when I or somebody else in the house starts screaming "THE INTERTOOBZ R SLOWZ!@!". I just had this happen to me the other night as I trying to watch possibly the worst movie ever on Amazon Prime. Maybe because I've been around a long time, my first suspicion is that something at home was slagging the ISP hop. This is often the case, but it is *maddeningly* slow to diagnose -- my popcorn was getting stale. Naively, I may have thought to hook up to one of the speed testers, but it would only show what was obvious from ping times, etc: lots of drops. So where was the problem? I had to manually go around and start disconnecting things. Even after I thought I had found the perp several times, my popcorn's freshness suffered. And in the end, I never did triangulate out where the problem was... and by morning it had magically fixed itself. My popcorn, on the other hand, gave its all. As we get more and more stuff on our home networks, the probability for crappy software, infected devices, piggy updates, etc multiplies. I'm sure this isn't news to $CORPRO network managers, but at home we quite literally have nothing to help us figure out and remedy these kinds of problems. Or if it turns out to *not* be our problem, that we have some reassurance when we decide to call the support desk and be put through IVR maze hell only to find out it was a local problem after all. cheers, Mike On 7/16/18 1:27 PM, Livingood, Jason wrote:
I recently talked at the IRTF on this subject and followed up with a blog post at https://blog.apnic.net/2018/06/21/measurement-challenges-in-the-gigabit-era/. There's also an open source speed test project you may want to consider at https://github.com/Comcast/Speed-testJS.
Jason
On 7/16/18, 2:00 PM, "NANOG on behalf of Chris Gross" <nanog-bounces@nanog.org on behalf of CGross@ninestarconnect.com> wrote:
I'm curious what people here have found as a good standard for providing solid speedtest results to customers. All our techs have Dell laptops of various models, but we always hit 100% CPU when doing a Ookla speedtest for a server we have on site. So then if you have a customer paying for 600M or 1000M symmetric, they get mad and demand you prove it's full speed. At that point we have to roll out different people with JDSU's to test and prove it's functional where a Ookla result would substitute fine if we didn't have crummy laptops possibly. Even though from what I can see on some google results, we exceed the standards several providers call for.
Most of these complaints come from the typical "power" internet user of course that never actually uses more than 50M sustained paying for a residential connection, so running a circuit test on each turn up is uncalled for.
Anyone have any suggestions of the requirements (CPU/RAM/etc) for a laptop that can actually do symmetric gig, a rugged small inexpensive device we can roll with instead to prove, or any other weird solution involving ritual sacrifice that isn't too offensive to the eyes?