Thanks guys. -Amolak On Thu, Apr 9, 2009 at 1:47 AM, Arie Vayner <arievayner@gmail.com> wrote:
Yes.
On Wed, Apr 8, 2009 at 9:03 PM, Amolak <amolak.singh@gmail.com> wrote:
Hi All,
Is it possible to create L2 Etherchannel at one end and L3 etherchannel at another end?
For Example:
SW-1 ====
interface GigabitEthernet1/1 channel-group 1 mode desirable channel-protocol pagp ! interface GigabitEthernet1/2 channel-group 1 mode desirable channel-protocol pagp ! interface Port-channel 1 no ip address switchport switchport access vlan 10 switchport mode access ! int vlan10 ip address 1.1.1.1 255.255.255.252 ! ------------------------------------
SW-2 ====
interface Port-channel 2 ip address 1.1.1.2 255.255.255.252 ! interface GigabitEthernet1/1 no ip address channel-group 2 mode desirable channel-protocol pagp ! interface GigabitEthernet1/2 no ip address channel-group 2 mode desirable channel-protocol pagp !
I don't have a lab to test it, can somebody confirm if the connectivity will work between these devices as per this setup.
Thanks, Amolak