Looks like what you want is the A920-CONS-KIT-S part. Description on it is "ASR 920 Serial Console Cabling Kit" This is a $0 item when ordered with the ASR920s. The other option is the A900-CONS-KIT-U which is the USB-USB console kit. http://www.cisco.com/c/en/us/td/docs/routers/asr920/hardware/installation/gu... Shows the adapter which I'm assuming is what's included in the kit, they mention needing the RJ-45 to DB9 cable (normal Cisco console cable) in addition to this ASR9XX specific adapter. Should be able to plug your normal terminal server cables into the adapter cable listed above. Hope this is helpful. Jeremy "TheBrez" Bresley brez@brezworks.com On 12/7/2015 4:15 PM, Erik Sundberg wrote:
We have one of these nice new and fancy Cisco ASR920-24SZ, just realized it doesn't have an RJ45 Console port only USB. When we deploy devices at our pop we wire the console port to a terminal\console server, well that doesn't work for a usb console device.
So what is everyone doing for out of band management via the console when it's a usb only device? Is there something I am missing? Is there a console server for USB? Does cisco make an USB to RJ45 Jack adapter?
________________________________
CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you.