Anyone using ASRs? We are demoing one to possibly upgrade our 7206s. We are seeing what looks like a memory leak on the RP. Cisco is looking at it and says they haven't seen it before. I am wondering if anyone else has run across this. With the default 2G of memory the RP only had about 1% free memory, and the router was rebooting every 5 days or so when the RP ran out. We upgraded and now have about 60% free on the RP, but I still see the used memory incrementing at a pretty steady rate. We are running IOS-XE 12.2(33)XNF. The router is currently not even routing traffic, just acting as a BGP peer so it has one set of full tables. It seems to be a process on the Linux OS side that has the leak as the IOS memory commands show everything staying pretty static. Thomas Magill Network Engineer Office: (858) 909-3777 Cell: (858) 869-9685 mailto:tmagill@providecommerce.com <mailto:tmagill@providecommerce.com> provide-commerce 4840 Eastgate Mall San Diego, CA 92121 ProFlowers <http://www.proflowers.com/> | redENVELOPE <http://www.redenvelope.com/> | Cherry Moon Farms <http://www.cherrymoonfarms.com/> | Shari's Berries <http://www.berries.com/>