You have to have the same outbound policy for all the members in the peergroup. I.e., no override of outbound policy for peer group members. Christina Y. Chu Sr. Network Engineer Verio - Northwest cyc@nw.verio.net (425)649-7493 On Thu, 12 Mar 1998, Andrew Brown wrote:
Question:
WHen you have a peer configured in a peer group the peering session policy is implemenated according to the peer group definition ie:
<bigger>neighbor testgroup peer-group
neighbor testgroup remote-as 2493
neighbor testgroup update-source Loopback0
neighbor testgroup send-community
neighbor testgroup version 4
neighbor testgroup route-map mci-bbone out
neighbor testgroup filter-list 70 out
</bigger>
<bigger>neighbor 130.200.17.250 peer-group testgroup
neighbor 150.300.12.13 peer-group testgroup
Why is it that when I try to remove the filter-list statement out of the peer group definition it gives me an error?? It appears you cannot assign different filter-lists to individual
members of a peer-group.
ie
no neighbor testgroup filter-list 70 out = works OK
then ..
neighbor 130.200.17.250 filter-list 70 out
produces this error
% Invalid command for a peer-group member
</bigger>I am trying to apply a different filter-list to different members of the same peer group.
Can anyone offer their advice/experience
greatly appreciated - I am definitly stuck here!
Andrew
--------------------------------><<-------------------------
Andrew Brown - Internetwork Design Engineer - Service Development
iSTAR internet inc Tel: (613)780-2210
250 Albert Street Fax: (613)780-6666
Ottawa, Ont, Canada K1P 6M1