What hardware you running the CHR on?
On Dec 5, 2017, at 10:29, Mike Hammett <nanog@ics-il.net> wrote:
I'm replacing an M10i with a CHR.
I hope you have a newer RE so that you don't have worse BGP convergence than a CCR.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com
Midwest-IX http://www.midwest-ix.com
----- Original Message -----
From: "mike lyon" <mike.lyon@gmail.com> To: tony@wicks.co.nz Cc: nanog@nanog.org Sent: Tuesday, December 5, 2017 12:11:27 PM Subject: Re: Small full BGP table capable router with low power consumption
Unfortunately, yes. Thats why two Juniper M7is just arrived on my doorstep yesterday...
On Dec 5, 2017, at 10:10, <tony@wicks.co.nz> <tony@wicks.co.nz> wrote:
Is that actually still true nowadays ? Of course there is always the option of running RouterOS on an X86 for an effective solution as well.
-----Original Message----- From: mike.lyon@gmail.com [mailto:mike.lyon@gmail.com] Sent: Wednesday, 6 December 2017 7:07 AM To: tony@wicks.co.nz Cc: nanog@nanog.org Subject: Re: Small full BGP table capable router with low power consumption
Bad thing about the CCRs is that their BGP process is single threaded. So even though it has a bunch of cores, it doesn’t utilize them for BGP.
-Mike