I wonder if this convergence time issue wouldn't be a typical mission for «BGP PIC Edge for MPLS Layer 3 VPNs». But it would be necessary to migrate the DFZ to a VPN MPLS (and configure composite nexthop and BGP PIC / «Provider Edge Link Protection»).
Le 24 mai 2018 à 09:20, Vincent Bernat <bernat@luffy.cx> a écrit :
This feature is already enabled on MX with MPC cards.
――――――― Original Message ――――――― From: Adam Kajtar <akajtar@wadsworthcity.org> Sent: 23 mai 2018 23:21 -0400 Subject: Re: Juniper BGP Convergence Time To: Mark Tinka Cc: nanog@nanog.org
Hello again:
I've tried using the default route, adjusting bgp timers, and mutlipath. Unfortunately, these changes haven't helped much. Juniper support hasn't been very helpful also. Although, I think I might have found the solution.
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/forwardin...
Let me know what you think.
On Tue, May 22, 2018, 4:03 AM Mark Tinka <mark.tinka@seacom.mu> wrote:
On 16/May/18 18:59, Phil Lavin wrote:
Ask if they will configure BFD for you. I’ve not found many transit providers that will, but it’s worth a shot and it will lower failure detection to circa 1 second.
We've tended to shy away from it, but we have 2 customers we've done it for.