Stephen is dead on here. In DOCSIS the downstream communication happens in one or more normal cable TV channel band, ie 6MHz channels from 54 MHz to 890MHz. The upstreams will be (in most cases) either 1.6 MHz, 3.2 MHz, or 6.4MHz wide and in the 5-42 MHz range. Scott Helms Vice President of Technology ZCorum (678) 507-5000 -------------------------------- http://twitter.com/kscotthelms -------------------------------- On Fri, Feb 27, 2015 at 4:56 PM, Stephen Satchell <list@satchell.net> wrote:
On 02/27/2015 01:27 PM, Jack Bates wrote:
My 2 cents. I don't design these things, but you'd think people would start realizing that static allocation is kind of limiting. Giving someone 50mb/s with 20mb/s waste is annoying when they are saturating 3mb/s the opposite direction. Wouldn't it be cool if your backup at night could use 50mb/s upstream and drop your downstream to 5mb/s because you aren't downloading anything?
That's possible with multicarrier technology, such as xDSL. When you get into the data-over-cable technology, you find a completely different story -- it's a system limitation that you have an upstream channel that is less efficient than the downstream channel because the upstream channel has to be accessed by a number of sources, with access control, whereas the downstream channel is nothing more than a broadcast pipe (just like 10base-2 Ethernet) where you pick your packets out of the stream.
Other technologies have their quirks, too...