More clues. It seems that everytime I ping with the 0000 pattern the controller counter: rx_soft_overrun_err=27473, increments. Philip --- Tim McKee <tim@baseworx.net> wrote:
This is most likely a framing or line-encoding mismatch, such as B3ZS vs PLCP on the physical DS3 or M13/M23 vs CBIT.
-----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Philip Lavine Sent: Monday, September 20, 2004 1:26 PM To: nanog Subject: Re: HSSI-adtran
To all,
I tried the attenuator and they failed to provide any relief.
Philip --- Alex Bligh <alex@alex.org.uk> wrote:
--On 20 September 2004 07:56 -0700 Philip Lavine <source_route@yahoo.com> wrote:
I am having a problem witha DS3 that terminates into a Adtran CSU (T3SU-300) and then into a 7200 with HSSI. I can not ping with a 0000 data pattern and I
experience packet loss
and errors when I pass TCP traffic.
Adtran recommended an attenuator.
What is the issue here? Is the signalling incompatible with a PA-T3+. Should I be wasting my time with an external CSU?
Last time I looked, PA-T3+ were even MORE fussy about the need for attenuation than the non-"plus" variants (of the "never actually work with a BT DS-3 delivered as standard" sort of fussy). So yes you are probably wasting your time with an external CSU, but you are also quite likely to need attenuators anyway.
Alex
_______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com
_______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com