On Sun, Jul 09, 2000 at 07:49:37PM -0400, HANSEN CHAN wrote:
Hi folks,
I was hearing that typically BGP4 is run on all routers inside a POP, including access routers connecting to customers, border routers connecting other ISPs and core routers connecting to other POPs in the same network.
I can understand why BGP4 is run on access and border routers. But running BGP4 on core routers is beyond my understanding. I thought you don't need to run BGP4 on core routers which are considered to be interior nodes.
Can someone shed some light on what is the benefit of running BGP4 on the core routers?
If these routers run "normal" ip routing you have to, as each router does a lookup of the destination ip address of each packet, and forward it accordingly. If you run MPLS, you don't have to, as it uses labels to get to the next-hop router. /Jesper -- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: Geek @ AS2109 (A much smaller network ;-) One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.