How about running ZeroTier on those Linux boxes and call it a day?

https://www.zerotier.com/

-Mike


On Feb 10, 2022, at 10:07, David Guo via NANOG <nanog@nanog.org> wrote:



You may try WireGuard and use ddns

 

From: NANOG <nanog-bounces+david=xtom.com@nanog.org> On Behalf Of William Herrin
Sent: Friday, February 11, 2022 2:02 AM
To: nanog@nanog.org
Subject: VPN recommendations?

 

Hi folks,

 

Do you have any recommendations for VPN appliances? Specifically: I need to build a site to site VPNs at speeds between 100mpbs and 1 gbit where all but one of the sites are behind an IPv4 NAT gateway with dynamic public IP addresses.

 

Normally I'd throw OpenVPN on a couple of Linux boxes and be happy but my customer insists on a network appliance. Site to site VPNs using IPSec and static IP addresses on the plaintext side are a dime a dozen but traversing NAT and dynamic IP addresses (and automatically re-establishing when the service goes out and comes back up with different addresses) is a hard requirement.

 

Thanks in advance,

Bill Herrin


--