I noticed that one I have already has the 1.1.0.8 firmware. Upon switching to it, I noticed that I gained SSH, but lost HTTP. Has anyone else seen that? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com ----- Original Message ----- From: "Jared Mauch" <jared@puck.nether.net> To: "Mike Hammett" <nanog@ics-il.net> Cc: "NANOG" <nanog@nanog.org> Sent: Sunday, June 28, 2015 2:56:17 PM Subject: Re: Quanta LB4M
On Jun 28, 2015, at 2:50 PM, Mike Hammett <nanog@ics-il.net> wrote:
Has anyone gotten a "non-factory" firmware to go onto these guys? There are a couple threads on Google that are inconclusive. There are rumors that it's the same as a Dell something or an HP something else, but no one has outright said, "I loaded a Dell XXXX firmware onto it and solved all of the random ass bugs."
I managed to brick one of these by loading the wrong firmware, or doing it at the wrong layer. I have gotten a few more and these are great switches for home or environment where you have a spare on hand. You can usually get them for around $100 on eBay. The firmware is *really* not designed for anything fancy but I’ve been able to drop in a variety of optics and have it work without issues in the 10G ports. Check the flash on them as there is a primary/secondary flash once you’re past the boot image. (Don’t try to flash it from that level, that’s how I killed it at least). I tossed a few different firmware versions I extracted here, as well as the flash0/flash1 images and the doc i found for it. http://puck.nether.net/~jared/lb4m/ - Jared