31 Jan
2011
31 Jan
'11
4:31 p.m.
-------- Original Message -------- Subject: Re: IPv6: numbering of point-to-point-links From: Randy Bush <randy@psg.com> To: Blake Hudson <blake@ispn.net> Cc: nanog@nanog.org Date: Monday, January 31, 2011 3:26:26 PM
I setup a p2p /127 link and found that BGP would not peer over the link; on whose equipment and image?
randy This was with a cisco 7200 - IOS 12.4 over a HE tunnel. Debugging BGP showed no activity until the interface mask was changed, as if BGP was not active and was not attempting to peer. The remote peer's state would only display as IDLE. After changing the interface mask to /126 peering came up instantly and I did notice some BGP logging that related to the 0 address on the network.