What exactly do you mean by meaningful traffic? ICMP from port to port works, can you pass TCP? SSH between routers? Establish a TCP session over it? Are you using Juniper SRXs ? :-) -- Leigh Porter On 19 Sep 2011, at 08:24, "jacob miller" <mmzinyi@yahoo.com> wrote:
I have tried the pings and am able to ping through with a size of 1600 with the df-bit set
without the df-bit am able to get up to 9000.
The switched on bot ends hav been set to allow jumbo frames through and the system MTU size and routing MTU sizes are at 1998. The switch is a 2960 Cisco switch.
I have set the mtu on the interface on the end router to 1600 and still unable to push meaningful traffic.
Regards, jacob Miller
----- Original Message ----- From: Randy Bush <randy@psg.com> To: jacob miller <mmzinyi@yahoo.com> Cc: "nanog@nanog.org" <nanog@nanog.org> Sent: Monday, September 19, 2011 9:55 AM Subject: Re: SDH Fiber Problem
I can ping on point to point I have BGP up and running When I try to pass traffic over the link my clients are unable to pass any meanigful traffic asn browsing is impossible.
mtu? try various size pings.
filters?
randy
______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________