You may treat-as-withdraw instead of discard.

However, this attribute does not affect routing.

It only affects whether a sender of packets to the route will add the entropy

label or not to the MPLS header, if such an MPLS header is added.

Therefore, it is safe to discard the attribute.

 

Kind Regards,

Jakob

 

 

From: Jakob Heitz (jheitz) <jheitz@cisco.com>
Date: Wednesday, August 30, 2023 at 8:15 AM
To: nanog@nanog.org <nanog@nanog.org>
Subject: Re: JunOS/FRR/Nokia et al BGP critical issue

IOS-XR passes on the attribute by default.

Some other routers incorrectly claim it to be malformed and reset the BGP session.

IOS-XR has a configuration to discard an attribute, so it will not pass it on.

It will pass the route with all its other attributes.

Here is an example configuration:

 

router bgp {asn}

attribute-filter group block_elc

  attribute 28 discard

!

neighbor {ip address}

  update in filtering

   attribute-filter group block_elc

  !

!

!

 

More info:

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/routing/command/reference/b-routing-cr-asr9000/bgp-commands.html#wp3145726977

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-8/routing/configuration/guide/b-routing-cg-asr9000-78x/implementing-bgp.html#concept_77EE033C2F0C4BDDB8423C25FA71E3F9

 

 

Kind Regards,

Jakob

 

 

From: Jakob Heitz (jheitz) <jheitz@cisco.com>
Date: Wednesday, August 30, 2023 at 7:43 AM
To: nanog@nanog.org <nanog@nanog.org>
Subject: Re: JunOS/FRR/Nokia et al BGP critical issue

The blog was updated. Correct link:

https://blog.benjojo.co.uk/post/bgp-path-attributes-grave-error-handling

The attribute was not malformed.

This is the hex dump of the attribute: “E0 1C 00”

It is described here.

https://www.rfc-editor.org/rfc/rfc6790#section-5.2

This attribute is deprecated, but that does not prevent routers from originating it or passing it on.

 

Kind Regards,

Jakob

 

----------------- Original message --------------

From: Mike Lyon <mike.lyon@gmail.com>
To: NANOG list <nanog@nanog.org>

Ran across this article today and haven't seen posts about it so i
figured I would share:

https://blog.benjojo.co.uk/post/bgp-path-attributes-grave-error-handling?fbclid=IwAR13ePY43Vf3u4X8PDyCDT39DtyXczAKkv6CGXOQbcQv90Y3aIAmTkJxn7k_aem_Ad0hzj2Mh_WlbFZug-vGdlJJdXr2Xo0RFIsPwAU2GviPz6xZDib76YHwFuzU7E0_sJk&mibextid=Zxz2cZ

Curious if anyone on the list is running VyOS and has experienced any problems?

Cheers,
Mike

--
Mike Lyon
mike.lyon@gmail.com
http://www.linkedin.com/in/mlyon