The default user name is admin and there is no password. --Louis -----Original Message----- From: ann kok [mailto:oiyankok@yahoo.ca] Sent: Friday, February 13, 2009 5:31 PM To: nanog@nanog.org; LEdouard Louis Subject: RE: anyone knows about extreme switch Thank you it works properly Do you know the default pw? Thank you again --- On Fri, 2/13/09, LEdouard Louis <LEdouard@edrnet.com> wrote:
From: LEdouard Louis <LEdouard@edrnet.com> Subject: RE: anyone knows about extreme switch To: oiyankok@yahoo.ca, nanog@nanog.org Received: Friday, February 13, 2009, 4:11 PM We use Extreme products, but use telnet or SSH behind firewall.
Can you use telnet? It provide more flexibility, but SSH is more secure
Regardless of the connection the CLI configuration is the same.
HyperTerminal setting?
Baud rate-9600 Data bits-8 Stop bit-1 Parity-None Flow control-XON/XOFF
Cable: Null-Modem RS-232 (9 pin to 25 pin)
Good luck!
--Louis
-----Original Message----- From: ann kok [mailto:oiyankok@yahoo.ca] Sent: Friday, February 13, 2009 3:31 PM To: nanog@nanog.org Subject: anyone knows about extreme switch
Hi
I have old model extreme switch
Anyone knows about hyperterminal setting.
ls null modem cable same as HP serial cables?
I try both cables in this switch and can see the boot information but keyboard is not responsing !
Thank you
__________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr!
__________________________________________________________________ Instant Messaging, free SMS, sharing photos and more... Try the new Yahoo! Canada Messenger at http://ca.beta.messenger.yahoo.com/