There are lots of ways to do it. Cable uses IPDR, which is baked into DOCSIS standards. http://en.wikipedia.org/wiki/Internet_Protocol_Detail_Record
On 10/15/14, 1:38 PM, "Colton Conor" <colton.conor@gmail.com> wrote:
So based on the response I have received so far it seems cable was a complicated example with service flows involved. What if we are talking about something simpler like keeping track of how much data flows in and out of a port on a switch in a given month? I know you can use SNMP, but I believe that polls in intervals and takes samples which isn't really accurate right?
On Wed, Oct 15, 2014 at 1:40 PM, <nanog@jack.fr.eu.org> wrote:
Folks, use sflow with rrdtool!
Quite awesome & handy
On 15/10/2014 20:14, Valdis.Kletnieks@vt.edu wrote:
On Wed, 15 Oct 2014 13:06:56 -0500, Colton Conor said:
on a cisco switch vs a DSL port on a DSLAM for example? I would
For GPON and Ethernet it's just SNMP counters. Frank -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Colton Conor Sent: Sunday, October 19, 2014 5:35 PM To: Livingood, Jason Cc: NANOG Subject: Re: Keeping Track of Data Usage in GB Per Port So it looks like DOCSIS cable has a great solution with IPDR, but what about DSL, GPON, and regular Ethernet networks? It was mentioned that DSL uses radius, but most new DSL systems no longer use PPPoE, so I don't believe radius is a viable option. What about Wifi Access Points? What would be the best way to track usage across these devices? On Wed, Oct 15, 2014 at 3:33 PM, Livingood, Jason < Jason_Livingood@cable.comcast.com> wrote: think
these
access switches would have some sort of stat you can count similar to a utility meter reader on a house. See what it was at last month, see what is is at this month, subtract last months from this months, and the difference is the total amount used for that month.
Assume a 20mbit connection. How many times can this roll over a 32 bit counter in a month if it's going full blast?