In message <BANLkTimyBLbf_W2EjKwnsL-zqBQsucqr_Q@mail.gmail.com>, Kenny Sallee w rites:
On Sun, Jun 26, 2011 at 5:02 PM, Deric Kwok <deric.kwok2000@gmail.com>wrote:
Hi all
I am trying to configure website for testing ipv6
Just wander how internet users eg: DSL users can visit this website and any people can access this website over the world
I did this by creating a 6to4 tunnel to a relay provided by
6in4, not 6to4. While HE do operate 6to4 relays, the brokered tunnel service is 6in4.
www.tunnelbroker.net provided by Hurricane Electric - a great service they provide BTW. They provide sample configuration templates for various routers and OS's. I created the 'tunnel' from a Cisco 871w router (don't forget to configure a firewall here since you'll get IPv6 public IP's assigned to you). I used their block of v6 addresses they assigned to me, along with IPv4 addresses I already had - ie dual-stack, on my various windows and linux boxes behind my firewall. I then used their IPv6 DNS server, which returns IPV6 addressing if there's an AAAA record for the website you are going to. Some sites - like google search are reachable via different DNS names, like ipv6.google.com or ipv6.cnn.com...and www.v6.facebook.com.
You can also build / use Teredo tunnels - which I tested and worked as well - tho not as good as from the routers. This works well for hosts behind IPv4 NAT
Finally, you can test your personal IPv6 connectivity here:
And you can test if your site, or any site, is reachable via IPv6 here: http://ipv6-test.com/validate.php if you do not have IPv6 configured.
Good luck, Kenny -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: marka@isc.org