Hello all, I am having very unusual problem with the CSM. This is what my problems. I have my active CSM setup for a Fault Tolerance group with a priority of 100 and an alternate of 30 and set to preempt. Now for some reason I cannot get the standby configure to get the configuration from the Active. I did a debug and it appears the CSM on the standby is deleting it's configuration and the active fails to sends its configuration. So I know the Active is talking across the VLAN I have created for this purpose. I can see the information coming up on my debug from both ends. Below is my configuration. Any help on this is appreciated. Thank you in advance. DR01.SNATXDC1# show module csm 8 ft detail FT group 2, vlan 45 This box is active Configuration is out-of-sync priority 100, heartbeat 1, failover 3, preemption is on alternate priority 30 total buffer count 6214, illegal state transitions 0 receive buffers not committed 0, send buffers not committed 0 updates: sent 4, received 0, committed 0 coup msgs: sent 0, received 0 election msgs: sent 0, received 2 heartbeat msgs: sent 1057, received 594 relinquish msgs: sent 0, received 0 conn replicate msgs: sent 462, received 0 conn refresh msgs: sent 462, received 0 conn reset msgs: sent 61, received 0 conn redundancy errors: msgs lost 0, msgs rejected 0 packets: total received 0, total dropped 0, duplicates 0 checksum failed 0, dumped 0, buffer unavailable 0 number of state updates in last 8 transfers: 0 0 0 0 0 0 0 0 Critical device and interface tracking: DR01.SNATXDC1# DR02.SNATXDC1#show module csm 8 ft detail FT group 2, vlan 45 This box is in standby state Configuration is out-of-sync priority 10, heartbeat 1, failover 3, preemption is off total buffer count 6214, illegal state transitions 10 receive buffers not committed 0, send buffers not committed 0 updates: sent 4, received 0, committed 0 coup msgs: sent 0, received 0 election msgs: sent 2, received 0 heartbeat msgs: sent 0, received 984 relinquish msgs: sent 0, received 0 conn replicate msgs: sent 0, received 0 conn refresh msgs: sent 0, received 0 conn reset msgs: sent 0, received 0 conn redundancy errors: msgs lost 0, msgs rejected 0 packets: total received 5056012, total dropped 0, duplicates 0 checksum failed 0, dumped 0, buffer unavailable 0 number of state updates in last 8 transfers: 0 0 0 0 0 0 0 0 Critical device and interface tracking: DR02.SNATXDC1# ! ft group 2 vlan 45 priority 100 alt 30 preempt DR02.SNATXDC1#show run module 8 Building configuration... Current configuration : 5 bytes end DR02.SNATXDC1#???? M.A.R