Mell, God idea , but , yes we did - no loops all are spokes - we know cabling and setup our switches and routers to syslog those events. Thank You Bob Evans CTO
Have you done a network analysis for viruses or bridge loops? This could be a broadcast storm caused by either of those network faults.
-mel
On Jun 19, 2015, at 10:08 AM, Sam Tetherow <tetherow@shwisp.net> wrote:
Only have 1 Pro on my network and it hasn't given me any issues, several of the original AP and AP-LR as well without issues.
What is the uptime on the AP? You should be able to ssh into the APs using the controller username and password. It is a linux base so 'uptime' will tell you. You can also check for ethernet errors using 'ip -s link' on the AP side.
On 06/19/2015 11:45 AM, Bob Evans wrote:
We have all APs set with static addresses. EdgeMax only hands out IPs to clients using the APs.
This happens when people are using the APs and when no one is even in the building at 2am when there are no clients connected. It can happen to one then 5 hours later it happens again...then doesn't happen again for 12 hours. Totally random no interval.
It is nice to know that others have no issues with these UniFi AP Pros. They seem to be fine except for the 2 mins or so they randomly drop link and reboot themselves. All are on APC UPSes and other devices in the same switch , like voip phones, never drop the ports.
They are all new, delivered in various batches over time. We checked and all are the latest versions.
Bob Evans
The IP can change on the UniFi without having to re-adopt or re-provision. APs are identified by MAC address at the UniFi protocol level (not layer 2).
On 06/19/2015 09:09 AM, Naslund, Steve wrote:
Here is another though. If your APs are re-provisioning every eight hours, what is your DHCP lease time? Are you sure the APs are able to renew their leases (if not, could your scope be full)? Do you see the IP addresses on the APs changing when they come back up? These could indicate a DHCP server issue. If the AP gets a new IP address it will likely have to be re-adopted to the controller. You might want to static address one or more APs to test this theory.
Steven Naslund Chicago IL