Hi, I'm looking at a setup where we use BGP to announce PI space to two upstream ISPs. ISP A provides a 30Mb/s connection and ISP B provides a 10Mb/s. Originally the plan was to use ISP B's link as a backup and local pref traffic outbound via ISP A and pref inbound using AS prepend via ISP A. It has now been requested to be able to distribute traffic across both links rather than preference traffic to the higher speed link. We are going to be using Juniper SRX210s to do this. I have some questions: - Is this really a good idea, as the BGP process won't care what the utilisation of the links are and you will see situations where the lower speed link gets used even though the high speed link utilisation is 0? - If we are doing this, I don't want to take a full routing table, I would rather just take the ISPs routes and perhaps their connected customers. One ISP has said they will only provide full routing table or default. I really don't want to take a full table, is receiving default only going to be a problem for my setup? - Any advice on how to avoid situations where the low bandwidth link is being used even though there is 0 utilisation on the high bandwidth link? Thanks Ahmed