Recently while running a packet capture I came across some unicast flooding that was happening on my network. One of our core switches didn't have the mac-address for a server, and was flooding all packets destined to that server. It wasn't learning the mac-address because the server was responding to packets out on a different network card on a different switch. The flooding I was seeing wasn't enough to cause any network issues, it was only a few megs, but it was something that I wanted to fix. I've ran into this issue before, and solved it by statically entering the mac-address into the cam tables. I want to avoid this problem in the future, and I'm looking at two different things. The first is preventing it in the first place. Along those lines, I've seen some recommendations on-line about changing the arp and cam timeouts to be the same. However, there seems to be a disagreement on which is better, making the arp timeouts match the cam table timeouts, or vice versa. Also, when talking about this, everyone seems to be only considering routers, but what about the timers on a firewall? I'm worried that I might cause other issues by changing these timers. The second thing I'm considering is monitoring. I'd like to setup something to monitor for any excessive unicast flooding in the future. I understand that a little unicast flooding is normal, as the switch has to do a little bit of flooding to find out where people are. While looking for a way to monitor this, I came across the 'mac-address-table unicast-flood' command on Cisco switches. This looked perfect for what I needed, but apparently it is currently not an option on 6500 switches with Sup720s. Since there doesn't appear to be an option on Cisco that monitors specificaly for unicast floods, I thought that maybe I could setup a server with a network card in promiscuous mode and then keep stats of all packets received that aren't destined for the server and that also aren't legitimate broadcasts or multicasts. The only problem with that is that I don't want to have to completely custom build my own solution. I was hoping that someone may have already created something like this, or that maybe there is a good reporting tool for wireshark or something that could generate the report that I want. Anyone have any suggestions on either prevention/monitoring? Thanks!! -Brian