The tech support of Verizon, don't know anything about ipv6. The business reps have never heard of it, either. On Wed, 15 Jun 2022 21:54:17 -0400, Dave Taht wrote:
On Wed, Jun 15, 2022 at 6:09 PM Christopher Morrow <morrowc.lists@gmail.com> wrote:
On Mon, Jun 13, 2022 at 12:00 PM Justin Streiner <streinerj@gmail.com> wrote:
I might call Verizon and ask about v6 availability as I periodically do. I'll check if I see anything different on my gear later today. I have a GPON business service with static IPv4 at one location and an older BPON business service with static IPv4 in another location.
As a short and not totally complete update to this problem... A 'long time listener, first time caller' sort of person noted to me off-list that: "Hey, once upon a time I dealt with hardware/vendor things... and we wouldn't send 'RA type' packets (solicits/etc) down the customer leg UNLESS they had already sent a RouterSolicitation... on the BNG platform."
So... I copy/pasta'd some comcast facing config and.. low and behold my link sends me a /56 if I ask for one via PD! for <reasons that include chris is holding it wrong> I can't personally use the v6 (yet) here, but this is super encouraging!
Perhaps this is 'CPE configuration away' from working in a bunch more places?
Well, in a FIOS location[1] with the most ancient fios provided CPE I know of (at least 10 years old), connected to a modern day openwrt router, it's been putting out dhcpv6 solicits with no response for roughly... 10 years.
It would be great if there was someone to call at FIOS about what gear will be v6 capable. This router also happens to have my longest running hurricane electric ipv6 tunnel.
Never did I imagine 10+ years ago that tunnel would still be in operation.
[1] http://esr.ibiblio.org/?p=4162
-chris
Thank you jms
On Mon, Jun 13, 2022 at 11:18 AM Nimrod Levy <nimrodl@gmail.com> wrote:
Also, it doesn't seem to be enabled on ports that have static ipv4
but progress is progress. we'll take it.
Nimrod
On Mon, Jun 13, 2022 at 11:17 AM Matthew Huff <mhuff@ox.com> wrote:
Still no IPv6 in Westchester County, NY ☹
Great sign though, maybe NY will get it eventually
From: NANOG <nanog-bounces+mhuff=ox.com@nanog.org> On Behalf Of Joe Loiacono Sent: Monday, June 13, 2022 10:55 AM To: nanog@nanog.org Subject: Re: Congrats to AS701
FiOS from Maryland (anonymized):
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.164 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::b104:8f4d:e5b2:e13b prefixlen 64 scopeid 0x20<link> inet6 2600:4040:b27f:cb00:a9b1:5f59:xxxx:xxxx prefixlen 64 scopeid 0x0<global> inet6 2600:4040:b27f:cb00:24a8:7b31:xxxx:xxxx prefixlen 64 scopeid 0x0<global> inet6 2600:4040:b27f:cb00:e1b6:8b83:xxxx:xxxx prefixlen 64 scopeid 0x0<global> ether d0:67:e5:23:ec:fe txqueuelen 1000 (Ethernet) RX packets 2518066 bytes 1448982813 (1.4 GB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2157395 bytes 260073952 (260.0 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
a@b:~$ ping 2607:f8b0:4004:c09::6a PING 2607:f8b0:4004:c09::6a(2607:f8b0:4004:c09::6a) 56 data bytes 64 bytes from 2607:f8b0:4004:c09::6a: icmp_seq=1 ttl=59 time=24.0 ms 64 bytes from 2607:f8b0:4004:c09::6a: icmp_seq=2 ttl=59 time=17.6 ms 64 bytes from 2607:f8b0:4004:c09::6a: icmp_seq=3 ttl=59 time=20.4 ms 64 bytes from 2607:f8b0:4004:c09::6a: icmp_seq=4 ttl=59 time=23.4 ms ^C --- 2607:f8b0:4004:c09::6a ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 17.618/21.351/23.983/2.555 ms
On 6/12/2022 1:55 PM, Christopher Morrow wrote:
On Sat, Jun 11, 2022 at 11:03 PM Darrel Lewis (darlewis) <darlewis@cisco.com> wrote:
I, for one, am having a hard time finding the proper words to express the joy that I am feeling at this momentous moment!
It's quite amazing, I think... that it's taken so long to get to deployment you can actually see on the fios plant :)
I'd note I can't see the below on my homestead, but I can at a relative's (where the ifconfig data is from).
I also can't tell if the upstream will PD a block to the downstream... and the VZ CPE is 'not something I want to fiddle with',
because everytime I have tried at my house I've just taken it out behind the woodshed with a maul... and replaced it with
something I CAN configure successfully. (plus.. don't want that TR 069 in my home...)
-chris
-Darrel
On Jun 11, 2022, at 7:05 PM, Christopher Morrow <morrowc.lists@gmail.com> wrote:
Looks like FIOS customers may be getting ipv6 deployed toward them, finally:
ifconfig snippet from local machine: inet6 2600:4040:2001:2200:73d2:6bcc:1e6b:43a1 prefixlen 64 scopeid 0x0<global> inet6 2600:4040:2001:2200:e87:bf36:b6cb:6ce1 prefixlen 64 scopeid 0x0<global>
ping attempt:
64 bytes from bh-in-f106.1e100.net (2607:f8b0:4004:c09::6a): icmp_seq=1 ttl=59 time=8.71 ms
8ms from mclean, va to ashburn, va isn't wondrous, but at least it's ipv6 (and marginally faster than ipv4)
Congrats to the 701 folk for deploying more widely!
(note: I don't know exactly when this started, nor how wide it really is, but progress here is welcomed by myself at least :) )
-chris
-- FQ World Domination pending: https://blog.cerowrt.org/post/state_of_fq_codel/ Dave Täht CEO, TekLibre, LLC
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com