On Fri, 24 Oct 2003, Roman Volf wrote:
Show Version:
Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
flash image: System image file is "flash:c3620-i-mz.122-12a.bin"
I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but theres no encapsulation command. I've googled it up for about 2 hours and have come up with nothing... the following command sequence is documented dozens of times:
Any help would be appreciated.
You have an IP-only image as shown by the c3620-i in the filename. For VLAN support you need at least an "Plus" image. Depending on your hardware this may require more RAM and/or flash. -- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net WestNet: Connecting you to the planet. 805 884-6323 WB6RDV NetLojix Communications, Inc. - http://www.netlojix.com/