You are joking I hope Sent from my iPhone On 2012-09-23, at 3:38 PM, "Shahab Vahabzadeh" <sh.vahabzadeh@gmail.com> wrote:
Dear Paul, Thanks for you reply, May I have those optimization knobs for virtual-template and throttles? Maybe looking into your configurations help me in this field. I will look for the service provider image too. Thanks
On Sun, Sep 23, 2012 at 11:17 PM, PC <paul4004@gmail.com> wrote:
For this application, you may wish to consider the service provider images.
The latest 15.x(S) image works, as it is the derivative of what was formerly the service-provider oriented 12.2(SRx) images.
However, it's unlikely to drop steady state CPU, but it may contain some optimizations for concurrent PPP (re)negotiations on the G2 platform during session recovery.
PPPoE will generally handle more users on ethernet as it is easier to push packets on when not dealing with the ATM encapsulations, but to what extent this holds true on the 7200, I can't tell you for sure.
I'd also read the broadband aggregation guide under the IOS documentation on cisco.com, and tune all the knobs that may help you, there are some pointers on what items on virtual-templates are punitive in performance, other optional items such as disabling SNMP counters on virtual access interfaces to reduce cpu usage, and other items that may help little by little. There are also various knobs to throttle PPPoE renegotiation rates during recovery.
I wish you luck (and consider getting another and/or bigger router to split the load).
On Sun, Sep 23, 2012 at 1:23 PM, Shahab Vahabzadeh < sh.vahabzadeh@gmail.com> wrote:
Which software you used before for them?
On Sun, Sep 23, 2012 at 10:43 PM, Rinse Kloek <rinse.kloek@isp.solcon.nl
wrote:
6000 PPP users on a NPE-G2 is way too much imho. Currently we do no more than 3000 users on a NPE-G2 with PPPoA. (Max cpu 50%). 5 years ago, we did about 5000 users on a NPE-G2, but as traffic ratio's grow each year the maximum users a NPE-G2 can handle will drop each year. Don't forget an NPE-G2 is a software based plaform, so traffic forwarding is done in software CPU.
regards, Rinse Kloek Op 23-9-2012 20:51, Shahab Vahabzadeh schreef:
Hello everybody, I am using C7206 VXR NPE-G2 routers as BRAS in my network and the current IOS is *c7200p-adventerprisek9-mz.**124-24.T.bin* on them.
Also their memory upgraded to 2GB instead of 1GB. And I have near 6500 online user on each of my BRAS and there is no speciefic feature except aaa with radius and ordinary features. There router is also terminating dot1q too because my PSTN centers
traffic
comes through dot1q vlans to BRAS es. I think I have some problem with current IOS, My CPU Usage is abnormal and Its near %70 or %80. And when I have a network problem and some of PSTN centers goes down CPU go to %99 and it gets problem to recovery. Do you know any good IOS for me as a service provider to use? I heard that some service providers have near 8000 online user on 7206. Thanks
-- Regards, Shahab Vahabzadeh, Network Engineer and System Administrator
Cell Phone: +1 (415) 871 0742 PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90
-- Regards, Shahab Vahabzadeh, Network Engineer and System Administrator
Cell Phone: +1 (415) 871 0742 PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90