On Wed, Jan 24, 2007 at 07:30:06PM -0500, Dan Mahoney, System Admin wrote:
Upon leaving a router at telx and asking one of their techs to plug in the equipment for me, I came back to find all my cat5 cables neatly tied with some sort of waxed twine, using an interesting looping knot pattern that repeated every six inches or so using a single piece of string. For some reason, I found this trick really cool.
I have tried googling for the method, (it's apparently standard, I've seen it in play elsewhere), and for the type of twine, but had little luck. I was wondering if any of the gurus out there would care to share what this knot-pattern is actually called, and/or if there's a (illustrated) howto somewhere?
From your description, it sounds like you might be describing a series of half hitches. I don't know if it has a more specific title than that. If you wanted to create it on (say) a vertical bundle, you just pass the line around the back of the bundle then put the working end between the line and the bundle, and tighten by pulling away from the knots you've already tied. Repeat this over and over up (or down) the bundle to get your nice pattern happening.
A benefit of this knot is that if you pull the working end towards the knots you've already tied, the knot will slide back, so you can tie each knot quickly then pull it back to the right position, so you get a nice even run of loops. You'll need to secure each end of the line with something that can stand tension at a sharp angle. A quick examination of pikiwedia's knots list suggests something like an icicle hitch or rolling hitch, but they might be a bit tricky to tie in tight spaces. I've just tried two half hitches on a broomstick and it doesn't hold too badly, but I wouldn't guarantee it'll be safe long term. As to the line to use, I'd imagine that an office supplies store would probably have a range of possibilities. - Matt -- "I have a cat, so I know that when she digs her very sharp claws into my chest or stomach it's really a sign of affection, but I don't see any reason for programming languages to show affection with pain." -- Erik Naggum, comp.lang.lisp