Hi
There is problem in our network. The connection is disappearing. From this i take is that you are using the avaya networking gear with
replied inline, with a summary below On 8/10/2011 2:35 PM, Deric Kwok wrote: the fcoe protocol enabled, this is a big no-no. you need to disable ipsec, then enable dns, your connection should come right back
ls it about lop ing?
it is not about lops at all, nor is it about looping, its all about the trees dude, there is a hidder feature called, treehugger protocol. and this will help prevent looping in the long term, its hidden behind the power chord, unplug the power cable from your switch, and you will see it between the three prongs. no that you can see this, test for excessive looping
How can I check it in switch?
if the step above failed, i would take the cable that is plugged into port 7 of your switch and plug the other end into port 13, it might help, i would also leave in there for a while, and go grab a cup of coffee
ls spammingtree disable by default?
only if there are branches
Thank you so much
welcome