Yes that's required. On Sat, Dec 7, 2019 at 7:05 AM Mike Hammett <nanog@ics-il.net> wrote:
Am I reading correctly in that there has to be a layer 3 configuration on the VLAN for that to function?
----- Mike Hammett Intelligent Computing Solutions <http://www.ics-il.com/> <https://www.facebook.com/ICSIL> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> <https://www.linkedin.com/company/intelligent-computing-solutions> <https://twitter.com/ICSIL> Midwest Internet Exchange <http://www.midwest-ix.com/> <https://www.facebook.com/mdwestix> <https://www.linkedin.com/company/midwest-internet-exchange> <https://twitter.com/mdwestix> The Brothers WISP <http://www.thebrotherswisp.com/> <https://www.facebook.com/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ------------------------------ *From: *"Siyuan Miao" <aveline@misaka.io> *To: *"Mike Hammett" <nanog@ics-il.net> *Cc: *"Steve Meuse" <smeuse@mara.org>, "nanog" <nanog@nanog.org> *Sent: *Friday, December 6, 2019 4:49:45 PM *Subject: *Re: Arista Switch Suggestion
I can confirm 7050X series do support this feature.We're using 7050SX and 7050S, 7050S isn't supported
https://www.arista.com/en/um-eos/eos-section-11-6-ethernet-configuration-com...
On Sat, Dec 7, 2019 at 6:42 AM Mike Hammett <nanog@ics-il.net> wrote:
I have not found x-flow to have the accuracy I would like. Either there's a loss of information due to sampling and such low-usage interfaces (or VLANs in this case) are lost in the noise or there's information overload due to no sampling at all.
I have seen very few platforms expose counter information about VLANs in the same way they do regular interfaces. Some Juniper platforms, Mikrotik, and I hear some Aristas as well.
----- Mike Hammett Intelligent Computing Solutions <http://www.ics-il.com/> <https://www.facebook.com/ICSIL> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> <https://www.linkedin.com/company/intelligent-computing-solutions> <https://twitter.com/ICSIL> Midwest Internet Exchange <http://www.midwest-ix.com/> <https://www.facebook.com/mdwestix> <https://www.linkedin.com/company/midwest-internet-exchange> <https://twitter.com/mdwestix> The Brothers WISP <http://www.thebrotherswisp.com/> <https://www.facebook.com/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ------------------------------ *From: *"Steve Meuse" <smeuse@mara.org> *To: *"Mike Hammett" <nanog@ics-il.net> *Cc: *"nanog" <nanog@nanog.org> *Sent: *Friday, December 6, 2019 4:20:08 PM *Subject: *Re: Arista Switch Suggestion
You should be able to do that with Sflow, which they all/most support.
Also, this seems like standard Ifmib stuff, any snmp poller should be able to handle that, from a metrics perspective .
-Steve
On Fri, Dec 6, 2019 at 4:31 PM Mike Hammett <nanog@ics-il.net> wrote:
I asked over at https://puck.nether.net/mailman/listinfo/arista-nsp a couple weeks ago, but didn't get an answer, so I have moved to a larger group.
I understand that some Arista switches will expose each VLAN in SNMP so I can monitor traffic on a VLAN independently of over VLANs on that same physical interface. Some of them don't.
Which ones do?
I prefer a solid used switch.
10G ports are fine.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com
Midwest-IX http://www.midwest-ix.com