On Oct 16, 2010, at 5:22 PM, Franck Martin wrote:
You give a /64 to the end users (home/soho), and /48 to multi homed organization (or bigger orgs that use more than one network internally) and get a /32 if you are an ISP.
Please DON'T do that. End users (home/soho) should get at least a /56 and ideally a /48. The standards and the RIR policies both allow for end-users/sites to get /48s. If you are an ISP, you get AT LEAST a /32.
See also the discussion about what to use in p2p links.
Yep. Personally, I like the /64 per subnet including p2p link approach. Others have different opinions. Owen
----- Original Message ----- From: "Brandon Kim" <brandon.kim@brandontek.com> To: nanog@nanog.org Sent: Sunday, 17 October, 2010 8:58:57 AM Subject: RE: Definitive Guide to IPv6 adoption
Thanks everyone who responded. This list is such a valuable wealth of information.
Apparently I was wrong about the /64 as that should be /32 so thanks for that correction....
Thanks again especially on a Saturday weekend!
From: rdobbins@arbor.net To: nanog@nanog.org Date: Sat, 16 Oct 2010 16:09:43 +0000 Subject: Re: Definitive Guide to IPv6 adoption
On Oct 16, 2010, at 10:56 PM, Joel Jaeggli wrote:
Then move on to the Internet which as with most things is where the most cuurent if not helpful information resides.
Eric Vyncke's IPv6 security book is definitely worthwhile, as well, in combination with Schudel & Smith's infrastructure security book (the latter isn't IPv6-specific, but is the best book out there on infrastructure security):
<http://www.ciscopress.com/bookstore/product.asp?isbn=1587055945>
<http://www.ciscopress.com/bookstore/product.asp?isbn=1587053365>
----------------------------------------------------------------------- Roland Dobbins <rdobbins@arbor.net> // <http://www.arbornetworks.com>
Sell your computer and buy a guitar.