On Mon, Jun 16, 2008 at 10:26:41PM -0500, Joe Greco wrote:
Maybe we just wire in more tight places, but I find that it's somewhat difficult to deal with more than about three excess inches when doing in-frame wiring. I don't want to have to deal with excess.
Perhaps it's because my wiring background, such as it is, runs more to video than networking...
but doesn't *anyone* put service loops in anything anymore?
Assuming you're using "service loops" in the sense of allowing enough cable to allow a server to slide out while running... usually in copper building wiring, the term loosely refers to excess cable or whathaveyou stuffed back into the conduit/cavity/box to allow for the fixture to be pulled out and worked on. When you've got a dense rack (think something like 30 1U servers, with a minimum of 4 x Cat5/6/etc to each one), "service loops" are a great way to significantly reduce your airflow. Think about how far you have to pull a server out... is anything significantly less than 30" deep these days? That means a lot of wire to store. When it isn't mission critical that downtime be minimized to the second, it changes the perspective on whether or not you need to be able to pull equipment while having it still running. So, if you really need the capability, an alternate method for providing "service loops" is to simply swap out cables. You disconnect the precut, swap in a nice long cable. Pull out your server. You lose connectivity for a moment or two, but don't need to make arrangements for extra feet of cable per each 1U. Each situation will have tradeoffs. Pick appropriately, as always. ... JG -- Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net "We call it the 'one bite at the apple' rule. Give me one chance [and] then I won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN) With 24 million small businesses in the US alone, that's way too many apples.