Hi Micah, There is a segment in the Hardware Side of the industry that produces "Network Appliances". (Folks such as Axiomtek, Lanner Electronics, Caswell Networks, Portwell etc etc) These appliances are commonly used as a commercial (OEM) platform for a variety of uses.. Routers, Firewalls, Specialized network applications etc. Our internal testing ( informal), matches up with the commonly quoted PPS handling by the different product vendors who incorporate these appliances in their network product offerings. i3/i5/i7 (x86) based network appliances will forward traffic as long as pps does not exceed 1.4million (In our testing we found the pps to be limiting factor and not the amount of traffic being moved) (will easily handle 6G to 10G of traffic Core2duo (x86) based network appliances will forward traffic as long as pps does not exceed 600,0000 pps (will easily handle 1.5G to 2G of traffic) Atom based (x86) network appliances will forward traffic as long as pps does not exceed 250,000 pps. ---------------------------------------- Of course, if you start to bog down the router with lots of NAT/ACL/ Bridge Rules (i.e. the CPU has to get involved in traffic management) then your actual performance will be degraded. Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: Support@Snappytelecom.net ----- Original Message -----
From: "micah anderson" <micah@riseup.net> To: nanog@nanog.org Sent: Monday, January 26, 2015 5:53:54 PM Subject: scaling linux-based router hardware recommendations
Hi,
I know that specially programmed ASICs on dedicated hardware like Cisco, Juniper, etc. are going to always outperform a general purpose server running gnu/linux, *bsd... but I find the idea of trying to use proprietary, NSA-backdoored devices difficult to accept, especially when I don't have the budget for it.
I've noticed that even with a relatively modern system (supermicro with a 4 core 1265LV2 CPU, with a 9MB cache, Intel E1G44HTBLK Server adapters, and 16gig of ram, you still tend to get high percentage of time working on softirqs on all the CPUs when pps reaches somewhere around 60-70k, and the traffic approaching 600-900mbit/sec (during a DDoS, such hardware cannot typically cope).
It seems like finding hardware more optimized for very high packet per second counts would be a good thing to do. I just have no idea what is out there that could meet these goals. I'm unsure if faster CPUs, or more CPUs is really the problem, or networking cards, or just plain old fashioned tuning.
Any ideas or suggestions would be welcome! micah