Tim, I can't speak to the 7600 series from experience (I'm using the 6509 with MSFC2); however, my opinion is that Cisco continues to market their routers as suitable for core routing whereas the routers are 'just acceptable' as an edge aggregation device. Several weeks ago there was a lively debate on Nanog regarding cisco performance, if I recall correctly, one party indicated that they upgraded from a 7206 NPE400 to a GSR and only saw a 30% improvement in CPU utilization. That's a lot of bling bling for 30%... I need only a few high capacity interfaces but a lot more acl, mpls, qos crunching horsepower than what I can get from Cisco right now. I'm curious whether vitamin J is a better option for the core at a specific price point. It would be great to have a comparison chart that showed a correlation between a Cisco Mach GT and Juniper Diablo at each key price point, $25,000, $50,000, $75,000 and so on. YMMV, Christopher J. Wolff -----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of Timothy Brown Sent: Monday, January 26, 2004 3:06 PM To: nanog@merit.edu Subject: Cisco 7600 I'm aware the Cisco 7600 series is really just an evolution/different way of orienting the chassis of the Catalyst 6500 line. I'm interested in talking to those of you who are doing production tasks in the backbone or core with the 7600, particularly if you've compared it to vendor J or can comment at length on MPLS, VRF, and uRPF features in the device. Please reply off-list. No sales droids please, this is a technical discussion. Tim