If it were me I would pickup a SupIII or SupIV off ebay. They are pretty cheap. Justin --- Justin Wilson <j2sw@mtin.net> MTIN Consulting Mikrotik UBNT Climbing Network Design http://www.mtin.net/ <http://www.mtin.net> http://www.thebrotherswisp.com -----Original Message----- From: Jay Ashworth <jra@baylink.com> Date: Friday, December 13, 2013 at 3:59 PM To: NANOG <nanog@nanog.org> Subject: Re: Catalyst IOS refresher site?
----- Original Message -----
From: "Jeremy Bresley" <brez@brezworks.com>
Might help if you said what type of line cards and sup you've got. A SupII era card is CatOS, SupIII and newer are IOS, command sets are completely different, and depending on the line cards you've got, you might have some of the really old L2 only cards (can't remember if you could do L3 on the bastard Gig/FE cards only, or if it was dependent on the particular Sup installed). That said, if it's an IOS Sup, I'd start here:
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_command_refer ence_list.html
Hmm. I wasn't smart enough to shoot a pic of the front panel, and I'm not picking it up til Monday, so I don't know. I have some background in Catalyst IOS, but it's old and on 3500-class switches, not the bigger iron.
Thanks, -- jra -- Make Election Day a federal holiday: http://wh.gov/lBm94 100k sigs by 12/14
Jay R. Ashworth Baylink jra@baylink.com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA #natog +1 727 647 1274