$50 on ebay http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR12.TRC2.A0.H0.Xconsole+server.TRS0&_nkw=console+server&_sacat=0 Andrew White Desk: 314.394-9594 | Cell: 314.308-7730 NetOps Consultant, DAS DNS group Charter Communications 12405 Powerscourt Drive St. Louis, MO 63131 -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Frank Bulk Sent: Thursday, September 10, 2015 9:37 AM To: 'Roland Dobbins'; nanog@nanog.org Subject: RE: NetFlow - path from Routers to Collector Does anyone else have a serial to IP dongle for devices that are IP only? That dongle would need to have telnet and SSH support. Or an IP-to-IP dongle, that would support a routing table? There's Brocade kit that has a mgmt. port, but it doesn't have its own routing table (they now have a mgmt. vrf in some software releases), making it local-only or something you have to use some kind of pseudo-NAT (all public IPs are translated to mgmt-network IPs). Frank -----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Roland Dobbins Sent: Tuesday, September 01, 2015 6:23 PM To: nanog@nanog.org Subject: Re: NetFlow - path from Routers to Collector <snip> Absolutely. All kinds of creative lashups to get console access in difficult situations (and, as you noted previously, an increasing number of devices don't support serial console at all, which is highly annoying). ----------------------------------- Roland Dobbins <rdobbins@arbor.net>