Owen, You can't share access from one splitter to multiple OLTs so the location of the splitter isn't important. AFAIK there is simply no concept for that idea in any of the PON specs and its certainly not something that Calix/Adtran/Zhone/Alcatel/$gear_maker are building right now. For that matter I can't think of a single piece of gear beyond DWDM/CWDM that actually operates are layer 1 to allow that kind of split and then its very limited in terms of the channels available and not suitable for the kind of deployment I think you're describing. On Thu, Jan 31, 2013 at 4:15 PM, Owen DeLong <owen@delong.com> wrote:
That's why I'm not advocating for open access, I'm advocating for L1/L2 provider separation and a requirement that the L1 access itself be open.
I have yet to get a firm answer, but as I understand PON, it doesn't actually matter so much whether you put the splitter/combiner in an MMR or near the CPE. Obviously, most of the "economy" of PON comes from putting the splitter near the subscriber, but so does the loss of open access at L1.
OTOH, if you build out fiber from a city or neighborhood or whatever to an independent MMR, I don't believe there's any reason you couldn't cross-connect various users home-run fibers to splitter/combiners inside the MMR and then run that to a PON system (if you really wanted to for some reason).
Owen
On Jan 31, 2013, at 12:45 , Scott Helms <khelms@zcorum.com> wrote:
Owen,
The short answer is that you don't today and it will be a long time (if ever) before its feasible. Europe is commonly held up as an example of an area where open access works and if you stick to DSL networks that's true. The problem is that the DSL networks (by and large) in Europe aren't expanding and are being overtaken by FTTx and to a lesser extent DOCSIS. The reasons why this is so can be debated, but it is definitely happening and given that trend there is very little incentive for the equipment manufacturers and protocol groups to build in open access as a core part of their design as it was in DSL, especially with PPPoX authentication.
Now, once networks get to purely active Ethernet things get more simple technically, after all you easily do QinQ tagging, but there has been little movement even in regulation tolerant Europe to force operators to open up and its much less likely to happen here in the US. Whats more many of the FTTx builds aren't Ethernet today and doing open access on any flavor of PON is so painful operationally that it simply won't happen.
On Thu, Jan 31, 2013 at 3:31 PM, Owen DeLong <owen@delong.com> wrote:
On Jan 31, 2013, at 07:07 , Ray Soucy <rps@maine.edu> wrote:
Late to the conversation, but I'll chime in that we established a model in Maine that is working pretty well, at least for middle-mile fiber.
When we started building out MaineREN (our RON) we decided that having the University own the fiber would tie it up in political red tape. So much so that it would ultimately not be made available to the private sector (because incumbents would accuse us of competing with them using public funds). We knew this because we had already spent a year in the legislature fighting off industry lobbyists.
Obviously there are considerable investments in such infrastructure that many private companies are unwilling or unable to make in rural areas (ROI takes too long), so we really wanted to make sure that future facilities would be built out in a way that would allow service providers to expand into the state cheaply, encourage competition, and ultimately provide better services at lower costs.
The goal was to establish geographically diverse, high stand-count, rings to reach the majority of the state, so we pitched it in a public-private partnership to go after Recovery Act funding.
That's also a worthy goal, but it doesn't address the issues that are the subject of this conversation. Middle-mile solutions like this are not all that uncommon, even in such backwards places (when it comes to networking infrastructure) as silicon valley.
Where we still have a serious lack of deployment and virtually no competition, even in most major metros, is the last mile.
As of a few months ago the build-out is complete, and the first networks to make use of the fiber are starting to come online (including MaineREN).
The way we did it was to have the state government create a new public utility designation of "Dark Fiber Provider". There are a few rules in place to keep things fair: Mainly they're forbidden to provide lit services and they're required to provide open access to anyone at published rates.
This is definitely a good first step if you can get it through the legislative process without having the $TELCOS and $CABLECOS lobby against it to the point of death or dismemberment.
The result is "Maine Fiber Company":
It's still early on, but I'm anxious to see how things look in 10 years or so.
Sounds great... Now, the $50,000,000 question... How do we replicate that model at the consumer level?
A lot of people who like the idea of what we've done aren't sure if it's a good model to apply for last mile fiber. Personally, I think replicating this model to deliver dark fiber to the home (much like electricity) is the only way we'll be able to shield providers from having to make major investments to deliver the level of service we really need. By keeping it as a dark-fiber only service, you create an environment where there is competition instead of one provider keeping speeds low and prices high.
That's certainly the ideal, yes.
I initially thought having L2 separation would be good in that service changes could be done remotely, etc. But after giving it some thought, I think it places way too much potential for L2 to be the bottleneck or source of problematic service and if it's provided by a public utility or municipality it could take very long to fix (if it get's fixed at all) due to politics and budget hawks. I really want to have choice between providers even at the L2 level.
There are cases where the lack of L2 services could pose a barrier to entry for competition. That's why I proposed the following requirements:
1. Must sell dark fiber to any purchaser. 2. Must sell dark fiber to all purchasers on equal terms. (There must be a published price list and there cannot be deviations from that price list. If the price list is modified, existing customers receive the new pricing at the beginning of their next billing cycle.) 3. May provide value-added L2 services 4. If L2 services are provided, they are also subject to rule 2. 5. May not sell L3 or higher level services. 6. May not hold ownership or build any form of alliance or affiliation with a provider of L3 or higher level services.
Owen
On Tue, Jan 29, 2013 at 12:54 PM, Jay Ashworth <jra@baylink.com> wrote:
----- Original Message -----
From: "Leo Bicknell" <bicknell@ufp.org>
I am a big proponent of muni-owned dark fiber networks. I want to be 100% clear about what I advocate here:
- Muni-owned MMR space, fiber only, no active equipment allowed. A big cross connect room, where the muni-fiber ends and providers are all allowed to colocate their fiber term on non-discriminatory terms.
- 4-6 strands per home, home run back to the muni-owned MMR space. No splitters, WDM, etc, home run glass. Terminating on an optical handoff inside the home.
Hmmm. I tend to be a Layer-2-available guy, cause I think it lets
smaller
players play. Does your position (likely more deeply thought out than mine) permit Layer 2 with Muni ONT and Ethernet handoff, as long as clients are *also* permitted to get a Layer 1 patch to a provider in the fashion you suggest?
(I concur with your 3-pair delivery, which makes this more practical on an M-A-C basis, even if it might require some users to have multiple ONTs...)
Cheers, -- jra -- Jay R. Ashworth Baylink jra@baylink.com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA #natog +1 727 647 1274
-- Ray Patrick Soucy Network Engineer University of Maine System
T: 207-561-3526 F: 207-561-3531
MaineREN, Maine's Research and Education Network www.maineren.net
-- Scott Helms Vice President of Technology ZCorum (678) 507-5000 -------------------------------- http://twitter.com/kscotthelms --------------------------------
-- Scott Helms Vice President of Technology ZCorum (678) 507-5000 -------------------------------- http://twitter.com/kscotthelms --------------------------------