Thanks for responses on this everyone. I went ahead with VRF. On Sun, Oct 6, 2013 at 12:26 AM, Fred Reimer <freimer@freimer.org> wrote:
I would need to lab it up, but assuming a MPLS core, can't you do a TE tunnel from the source to the desired egress router?
On 10/5/13 2:43 PM, "Christopher Morrow" <morrowc.lists@gmail.com> wrote:
On Sat, Oct 5, 2013 at 2:08 PM, joel jaeggli <joelja@bogus.com> wrote:
On Oct 5, 2013, at 9:45 AM, Christopher Morrow <morrowc.lists@gmail.com> wrote:
you really don't want to do policy routing :(
PBR has this tendency to be brittle in the face of topology changes.
yup, exactly my point :(
There are much better way to outbound load-balance between providers offering same or similar quality routes to the same destination.
multi-AS multipath will do that if the peers are on the same router. BGPaddpath can do it for you if the peers are spread across routers.
these both will require seeing the longer prefix from the right peer though, right? and selecting that would just be like natural selection anyway...
yikes, I suppose you could: 1) generate the longer prefix internally 2) set it's next-hop to something reachable out both (all) peers 3) metric the preferred peer's next-hop appropriately 4) profit
but that sounds also kind of messy and prone to odd failures when changes are made :( you'd be adding complexity that you'd have to track through the life of your network :( (and explain to anyone 'not you' working on the network)
-chris
joel
On Sat, Oct 5, 2013 at 12:19 PM, Anurag Bhatia <me@anuragbhatia.com> wrote:
Hello there!
I am trying to do a source based outbound routing between multiple upstreams. Usually I picked outbound via localpref but here I wish to use Provider 1 for say 10.10.10.0/24 while provider 2 for small chunk of it say 10.10.10.0/28. I wish to keep failover support and thus so if provider 2 fails, I wish to push traffic again via Provider 1.
Is this is possible only with VRF or I can push for some specific match rule in route maps?
Thanks.
--
Anurag Bhatia anuragbhatia.com
Linkedin <http://in.linkedin.com/in/anuragbhatia21> | Twitter<https://twitter.com/anurag_bhatia> Skype: anuragbhatia.com
-- Anurag Bhatia anuragbhatia.com Linkedin <http://in.linkedin.com/in/anuragbhatia21> | Twitter<https://twitter.com/anurag_bhatia> Skype: anuragbhatia.com