This may be a silly question but.. How did it get in there? -- Leigh Porter -----Original Message----- From: Robert Lusby [mailto:nanogwp@gmail.com] Sent: Wed 5/4/2011 9:43 AM To: nanog@nanog.org Subject: OT: Server Cabinet Sorry to start the day OT, but I'm sure you lovely lot will have some tips/experience! ;) We have a HP Server Cabinet (42U 10842 G2), that we've stripped down to the bare-bones chassis. It now measures 750mm wide. We have a door-way that said server cabinet must fit through, measuring up at 620mm. The cabinet chassis is welded at all four corners, so can't be taken apart any more without being cut. Can you see where this is leading yet? Three obvious questions: 1) Have you ever had to fit a cabinet through a doorway that's too small? 2) How did you do it? Cut cabinet, demolish wall ...? 3) If you cut the cabinet, any tips? Thanks. Rob ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________