Hi Simon, In the previous job, we used it in a similar scenario and from that experience × × What works fine across end points: Routing protocols (OSPF, BGP), VLAN, QinQ, Multicast What doesn't' work across end points: LLDP, LACP, CoS preservation (you can remark), 802.1x So, test your requirements in the lab (as you are already doing it), its not a VPLS replacement in many ways but it worked like a charm in our requirement. We used Open-network boxes (Dell, HP, etc) along with CumulusLinux (Dell OS9 also has VXLAN support). Arista (Trident II/II+) also works fine with EOS. All these switches were and still are for DC but they are extremely cheaper than NCS5000 series and works fine. On Thu, 20 Jul 2017 at 19:14 Simon Lockhart <simon@slimey.org> wrote:
All,
I'm currently going through a network design for an upgrade for one of the networks I run. Much of the wide-area traffic on the network is used purely to transport Ethernet tail circuits back from an edge PoP to a core PoP. Currently we're using Extreme X460 and X670 switches to achieve this, carrying the tail circuits within VPLS.
Two things are making me look at a change of solution for this - firstly Extreme have stated that they're not interested in the service provider market any more (and reflected this in significant reductions in discounts), and secondly we need to look at higher bandwidth port options (40G + 100G, particularly for backhaul circuits).
As we're primarily a Cisco house, I've been looking at suitable replacements, and the Nexus 9k range looks good - 92160YC and 9236C in particular. However, this would mean a shift from VPLS to VXLAN. We're also looking at Cisco-like products, such as the Arista range.
We've been doing some testing in the lab, and so far, things look good - it's easy to configure, and appears to do the job of getting packets from A to B.
We do have two concerns, though:
1) Cisco are strongly advising against using the Nexus switches in a WAN scenario - as they're designed for "datacentre" use. They've so far said they can't find anyone who can help validate designs using Nexus, and instead are pushing us towards the NCS-5000 series switches. Same chipset, but 2-3 times the price! NCS does, however, support VPLS, so would be an easier drop-in to our existing network.
2) Traffic engineering - we don't have a lot of requirement for this, but do have a small number of customers who buy A and B circuits, and require them to be routed across different paths on our network. This is easy with MPLS using explicit LSPs, but we've not yet worked out how to achieve the same thing in VXLAN.
So, my question to the community is - have any of you used VXLAN as a wide-area layer 2 transport technology? Any pros or cons? Gotchas? Scare stories? Recommendations? Am I trying to shoot myself in the foot?
Many thanks,
Simon
-- Best Wishes, Aftab A. Siddiqui